USB 2.0 Full Speed

Controller Area Network V2.0B

Implements ISO-11898 Standard Physical Layer

Supports 1 Mb/s operation (125 Kbps default)

Receive buffers, masks, filters, and data byte filtering

Supports one-shot mode

5 mA active current (typical); 1uA standby current (typical) (sleep mode)

Power-on Reset and voltage brown-out protection

Detection of ground fault (permanent Dominant) on TXD input

Up to 112 nodes can be connected

120 Ohm line termination; enabled/disabled by jumper

IEC 61000-4-2 (ESD) ± 15KV (air/contact)

IEC 61000-4-4 (EFT) 50A (5/50ns)